Follow

Resellers: How to configure Cisco Devices

Configuring Cisco Devices

http://x.x.x.x/admin/resync?http://p-nj.5060.cloud/cfg/spa$MA.cfg

 

 

CONFIGURING SPA 122 

*The below is needed for Cisco SPA 122 to enable web GUI first before you can use the above link*

 

STEP1: Connect your computer to the ETHERNET (Yellow) port of the ATA. Your computer will obtain an ip address in the 192.168.15.x range. Make sure your computers Ethernet adapter is set for DHCP.

STEP2: Open a web browser and enter 192.168.15.1 (default ip of ATA)

STEP3: To log in for the first time as Administrator

  • Username: admin
  • Password: admin

Step4: Select the Administration Tab

  • User List => select the admin icon to change username and password => SUBMIT
  • Web Access Management => Remote Management => enable => SUBMIT
  • Now you can connect your ATA to the Network to remote manage
  • Connect to phone line 1 press **** then 110# to get ip address of ATA

Once this is done you can use the string at the top of this thread to configure ATA

 
Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.